Fire Rated Glazed Door and Window

Approx. Rs 25,000 / sq ftGet Latest Price

Product BrochureProduct Details:

Providing  of 4C Fire Protection make fire resistant door frame of section  60x 60 mm on horizontal side &  vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 )  suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade.Providing  of 4C Fire Protection make fire resistant door frame of section  60x 60 mm on horizontal side &  vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 )  suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter .Providing of Pyroguard/Schott make  Glass glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of  size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm  c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-in-charge. The glass should be clear, toughened, interlayered, non-wired fire resistant having minimum 11 mm thickness of approved brand with 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 min of insulation (EI20) and having a sound reduction of ≥37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments).   

Approx. Rs 4,150 / Square MeterGet Latest Price

Product BrochureProduct Details:

Clean Room Door is manufactured from galvanized/stainless steel sheets with lock formed edges. Insulated and bonded with honeycomb paper, mineral wool or polyurethane foam forming a rigid flush fitting with innovative flush double glazed finished in pure polyester powder coating of 60-80 microns forming a smooth surface finish.

Specifications

• Single leaf and double leaf frames
• Finishing in pure or epoxy polyester powder coating
• Ability of accepting glazing in many configurations with louvers, air vents, and a wide range of hardware

 

Metal Doorsteps Available in

• Sizes up to 2200mm
• Height: 2500 mm